In 99% of cases, you can install gun grips and knife scales yourself if you have the right tools. Here are the tools you’ll need:
SL (Slotted) – Found in older gun grips. It’s rarely used in modern models, but the folks at Hinderer love them.
PH (Phillips) – Slightly more common than SL and found in both gun grips and knife scales, but also not common in modern models.
H (Hex) - How many tears have been shed trying to unscrew a screw with this head when the hex turns into a circle
T/TX (Torx) - The modern and most popular type of screw. This tool is a must-have in your collection if you’re a modern, trendy guy
Custom - Some manufacturers come up with their own unique fastening systems, for which finding the right tools isn’t exactly easy or cheap, which is why I call them the 1%
There are so many different and interesting materials. Thanks to you, I continue to explore new materials that can be used to make gun grips and knife scales. Here’s what I’m working with right now:
Wood
Composites
Experimental materials
You've come to the right place. If you ask “What can you offer?”, I'll ask you “What do you need?”. The project is growing and evolving thanks to you and your requests. To put it briefly, anything is possible with the materials I have on hand. To give a more detailed answer with examples, here’s what we’ve got:
- Is it possible to create a custom style?
- Yes!
- Can you use walnut instead of maple?
- Yes!
- Can I send my own material?
- Yes!
- Can the clip attachment point be changed?
- Yes!
- Can it be painted a different color?
- Yes!
- Can you make one for my knife? You don’t have it in stock
- Yes, for free! Send me the original
- Can elements be removed or added to the current style?
- Yes!
I may have forgotten something, but you should get the general idea of what’s possible. Just contact me and let me know how I can help you!
You should brush your teeth every day. But gun grips and knife scales can be cleaned much less frequently. The cleaning method depends on the material
How to clean wooden grips (scales)?
Maple, Amaranth, Karelian birch, Walnut, Merbau. Due to its natural properties, the wood may darken slightly over time. To lighten it and restore its original contrast, you’ll need sandpaper with a grit of 200 or higher. Gently rub the surface, blowing away any wood dust. Then apply two coats of any protective clear oil and let it dry for two days in a well-ventilated room. I would recommend OSMO 3101
WARNING! Do not do this on surfaces painted in colors other than maple. If you sand over red acrylic, you will no longer have red acrylic
WARNING! Do not do this too often. If there is a decorative pattern, it will wear away completely after frequent sanding
Padauk. What a tricky wood! This exotic wood is naturally rich in oils. When protective oil is applied to the surface, padauk releases its own oils, causing the oil to dry unevenly. Twenty-four hours after applying the oil, wipe the surface with a soft cloth dampened with warm water to remove any excess
Wenge. Everything is the same
When cleaning wooden grips (scales)?
This is usually done after a year or more. Consider the circumstances and frequency of use. I’m sure you all wash your hands before shooting
